Wiki source code of Touch Taster
Last modified by Stefan Taferner on 2016/08/31 13:31
Show last authors
author | version | line-number | content |
---|---|---|---|
1 | (% class="western" lang="en-US" %) | ||
2 | [[image:touch_installed.jpg||style="float:right"]]This Touch sensor uses the Atmel One-channel Touch Sensor IC for sensing. The sensing field can be made smaller or bigger by changing the value of C1 (higher value = bigger sensing field) . | ||
3 | |||
4 | (% class="western" lang="en-US" %) | ||
5 | For the firmware we use 'tasterschittstelle_wd_4fach.hex'. How to set the parameters for the leds in ETS, please view the user manual. | ||
6 | |||
7 | (% class="western" lang="en-US" %) | ||
8 | The touch sensor can be mounted with a GIRA support metal and GIRA window, or the specific designed support metal with for example plexiglass and a wooden finish plate. It is also possible to use other types of finish material like stone, however when finishing with a metal plate it should not make contact with the touch sensor support metal. | ||
9 | |||
10 | |||
11 | |||
12 | (% class="western" lang="en-US" %) | ||
13 | == == | ||
14 | |||
15 | (% class="western" lang="en-US" %) | ||
16 | == More Images == | ||
17 | |||
18 | |[[image:touch_front.jpg]]|[[image:touch_back.jpg]]|[[image:touch_installed_nofront.jpg||height="225" width="209"]]| | ||
19 | |||
20 | == Downloads == | ||
21 | |||
22 | [[[[image:Main.Icons_22@icon_eagle_22.png]] Touch sensor 1.8 schematics>>url:https://github.com/selfbus/hardware/raw/master/Module/TouchSensor/Touch%20control%201.8.sch]] | ||
23 | |||
24 | [[[[image:Main.Icons_22@icon_board_22.png]] Touch sensor 1.8 board>>url:https://github.com/selfbus/hardware/raw/master/Module/TouchSensor/Touch%20control%201.8.brd]] |