Touch Taster
Last modified by Stefan Taferner on 2016/08/31 13:31
This Touch sensor uses the Atmel One-channel Touch Sensor IC for sensing. The sensing field can be made smaller or bigger by changing the value of C1 (higher value = bigger sensing field) .
For the firmware we use 'tasterschittstelle_wd_4fach.hex'. How to set the parameters for the leds in ETS, please view the user manual.
The touch sensor can be mounted with a GIRA support metal and GIRA window, or the specific designed support metal with for example plexiglass and a wooden finish plate. It is also possible to use other types of finish material like stone, however when finishing with a metal plate it should not make contact with the touch sensor support metal.
More Images
 |  |  |
Touch sensor 1.8 schematics
Touch sensor 1.8 board