Wiki source code of Geräte in Entwicklung
Last modified by Christian B. on 2023/03/19 23:05
Hide last authors
author | version | line-number | content |
---|---|---|---|
47.2 | 1 | [[image:Icons@icon_admittance_128.png||data-xwiki-image-style-alignment="end"]] | |
24.1 | 2 | ||
3 | == STOPP == | ||
4 | |||
5 | Die Geräte auf dieser Seite sind derzeit in Entwicklung und noch nicht für den allgemeinen Gebrauch freigegeben. | ||
6 | |||
7 | **Für Entwickler only, nicht produktiv verwenden!** | ||
8 | |||
42.2 | 9 | (% style="width:1169px" %) | |
10 | |(% style="width:932px" %)((( | ||
34.1 | 11 | = [[Heizungsaktor 8 Kanal>>doc:GeräteEntwicklung.Heizungsaktor]] = | |
25.2 | 12 | ||
27.1 | 13 | [[image:http://selfbus.myxwiki.org/xwiki/bin/download/Selfbus/Icons/icon_status_beta_32.png||alt="Beta"]] Status: Beta. Version mit Selfbus VD und Firmware vorhanden. Hardware ist der out8 oder der SSR8. | |
42.2 | 14 | )))|(% style="width:234px" %) | |
15 | |(% style="width:932px" %)((( | ||
34.1 | 16 | = [[Lauflicht>>doc:GeräteEntwicklung.LauflichtOut8]] = | |
24.1 | 17 | ||
27.1 | 18 | [[image:http://selfbus.myxwiki.org/xwiki/bin/download/Selfbus/Icons/icon_status_beta_32.png||alt="Beta"]] Status: Beta. Version mit out8 VD und Software vorhanden. hardware ist der out8. | |
42.2 | 19 | )))|(% style="width:234px" %) | |
20 | |(% style="width:932px" %)((( | ||
34.1 | 21 | = [[Wetterstation>>doc:GeräteEntwicklung.Wetterstation]] = | |
24.1 | 22 | ||
33.1 | 23 | [[image:http://selfbus.myxwiki.org/xwiki/bin/download/Selfbus/Icons/icon_status_beta_32.png||alt="Beta"]] Status: Beta. Version von VD und Software vorhanden. Anschluss an LPC Controller oder über Funk mit etwas Bastelaufwand. | |
47.2 | 24 | )))|(% style="width:234px" %)[[image:Wetterstation@WS155klein.JPG||data-xwiki-image-style-alignment="start" width="200"]] | |
42.2 | 25 | |(% style="width:932px" %)((( | |
35.1 | 26 | === [[Bewegungsmelder mit integriertem Busankoppler IP54>>doc:GeräteEntwicklung.Bewegungsmelder_SL1]] === | |
24.1 | 27 | ||
28 | Hier wird beschrieben wie der Bewegungsmelder Steinel IS1 umgebaut werden kann, damit dieser direkt am Bus angeschlossen werden kann. | ||
29 | |||
30 | [[image:http://selfbus.myxwiki.org/xwiki/bin/download/Selfbus/Icons/icon_status_beta_32.png||alt="Beta"]] Status: Hardware ist fertig gestellt, Software muss noch geändert werden. | ||
42.2 | 31 | )))|(% style="width:234px" %)((( | |
47.2 | 32 | == [[image:SAM_1404.JPG||alt="Steinel.jpg" data-xwiki-image-style-alignment="start" style="display:block; margin-left:auto; margin-right:auto" width="200"]] == | |
24.1 | 33 | ))) | |
42.2 | 34 | |(% style="width:932px" %)((( | |
47.2 | 35 | === [[2fach Dimmer 230V>>https://selfbus.org/wiki/devices/outputs/62-dimming-actuator-2x-230v-4module-units]] === | |
24.1 | 36 | ||
37 | Ein Dimmer für 230V Verbraucher mit 2 Kanälen in einem 4TE REG Gehäuse. | ||
38 | |||
36.1 | 39 | [[image:Icons@icon_status_done_32.png||alt="Done" style="vertical-align:bottom"]] Status: Fertig gestellt, aber nur mit Workarounds zu betreiben und nicht für produktiven Einsatz empfohlen. | |
42.2 | 40 | )))|(% style="width:234px" %)((( | |
47.2 | 41 | == [[image:Dimmer_2x230_4TE@Dimmer_1.jpg||data-xwiki-image-style-alignment="start" style="display:block; margin-left:auto; margin-right:auto" width="200"]] == | |
24.1 | 42 | ))) | |
42.2 | 43 | |(% style="width:932px" %)((( | |
34.1 | 44 | === [[Regenmesser>>doc:GeräteEntwicklung.Regenmesser]] === | |
24.1 | 45 | ||
46 | Anschaltung eines Regenmessers mit Messwippe an den Bus. | ||
47 | |||
36.1 | 48 | [[image:Icons@icon_status_alpha_32.png||alt="Alpha" style="vertical-align:bottom"]] Status: Die Hardware ist geroutet. | |
42.2 | 49 | )))|(% style="width:234px" %) | |
50 | |(% style="width:932px" %)((( | ||
47.3 | 51 | === [[6-fach Taster mit RGB LEDs>>https://selfbus.org/wiki/devices/inputs/63-push-button-sensor-6x-with-rgb-leds-and-proximity-sensor]] === | |
38.2 | 52 | ||
53 | Taster für Unterputzmontage mit 6 RBG LEDs und Näherungserkennung | ||
54 | |||
42.1 | 55 | [[image:Icons@icon_status_done_32.png||alt="Done" style="vertical-align:bottom"]]Status: Fertig gestellt, bei mir im Dauerbetrieb, weitere Tester gesucht | |
47.2 | 56 | )))|(% style="width:234px" %)[[image:nur_Taster_beleuchtet.JPG||alt="nur_Taster_beleuchtet.jpg" data-xwiki-image-style-alignment="start" height="211" width="200"]] | |
42.2 | 57 | |(% style="width:932px" %)((( | |
38.3 | 58 | === [[RTR mit VOC und Luftfeuchtigkeitsmessung>>doc:.RTR mit VOC- und Luftfeuchtigkeitsmessung.WebHome]] === | |
38.2 | 59 | ||
60 | Raumtemperaturregler mit VOC und Luftfeuchtigkeitssensor | ||
61 | |||
42.1 | 62 | [[image:Icons.WebHome@icon_status_beta_32.png||alt="Alpha" style="vertical-align:bottom"]]Status: Hardware fertig gestellt, Software ebenfalls und auf Testaufbau getestet, Feldversuch im Dauerbetrieb steht noch aus | |
42.2 | 63 | )))|(% style="width:234px" %) |