Wiki source code of Touch Taster

Version 18.1 by Stefan Taferner on 2016/08/24 09:21
Show last authors
1 (% class="western" lang="en-US" %)
2 [[image:touch_installed.jpg||style="float: right;"]]This Touch sensor uses the Atmel One-channel Touch Sensor IC for sensing. The sensing field can be made smaller or bigger by changing the value of C1 (higher value = bigger sensing field) .
3
4 (% class="western" lang="en-US" %)
5 For the firmware we use 'tasterschittstelle_wd_4fach.hex'. How to set the parameters for the leds in ETS, please view the user manual.
6
7 (% class="western" lang="en-US" %)
8 The touch sensor can be mounted with a GIRA support metal and GIRA window, or the specific designed support metal with for example plexiglass and a wooden finish plate. It is also possible to use other types of finish material like stone, however when finishing with a metal plate it should not make contact with the touch sensor support metal.
9
10 |[[image:touch_front.jpg]]|[[image:touch_back.jpg]]
11 |[[image:touch_installed_nofront.jpg||width="300"]]|
12
13 == Downloads ==
14
15 [[[[image:Main.Icons_22@icon_eagle_22.png]] Touch sensor 1.8 schematics>>url:https://github.com/selfbus/hardware/raw/master/Module/TouchSensor/Touch%20control%201.8.sch]]
16
17 [[[[image:Main.Icons_22@icon_board_22.png]] Touch sensor 1.8 board>>url:https://github.com/selfbus/hardware/raw/master/Module/TouchSensor/Touch%20control%201.8.brd]]