Wiki source code of Touch Taster
Last modified by Stefan Taferner on 2016/08/31 13:31
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
17.1 | 1 | (% class="western" lang="en-US" %) |
| |
20.1 | 2 | [[image:touch_installed.jpg||style="float:right"]]This Touch sensor uses the Atmel One-channel Touch Sensor IC for sensing. The sensing field can be made smaller or bigger by changing the value of C1 (higher value = bigger sensing field) . |
| |
17.1 | 3 | |
| 4 | (% class="western" lang="en-US" %) | ||
| 5 | For the firmware we use 'tasterschittstelle_wd_4fach.hex'. How to set the parameters for the leds in ETS, please view the user manual. | ||
| 6 | |||
| 7 | (% class="western" lang="en-US" %) | ||
| 8 | The touch sensor can be mounted with a GIRA support metal and GIRA window, or the specific designed support metal with for example plexiglass and a wooden finish plate. It is also possible to use other types of finish material like stone, however when finishing with a metal plate it should not make contact with the touch sensor support metal. | ||
| 9 | |||
| 10 | |||
| |
20.1 | 11 | |
| 12 | (% class="western" lang="en-US" %) | ||
| 13 | == == | ||
| 14 | |||
| 15 | (% class="western" lang="en-US" %) | ||
| 16 | == More Images == | ||
| 17 | |||
| 18 | |[[image:touch_front.jpg]]|[[image:touch_back.jpg]]|[[image:touch_installed_nofront.jpg||height="225" width="209"]]| | ||
| 19 | |||
| |
17.1 | 20 | == Downloads == |
| 21 | |||
| |
18.1 | 22 | [[[[image:Main.Icons_22@icon_eagle_22.png]] Touch sensor 1.8 schematics>>url:https://github.com/selfbus/hardware/raw/master/Module/TouchSensor/Touch%20control%201.8.sch]] |
| |
17.1 | 23 | |
| |
18.1 | 24 | [[[[image:Main.Icons_22@icon_board_22.png]] Touch sensor 1.8 board>>url:https://github.com/selfbus/hardware/raw/master/Module/TouchSensor/Touch%20control%201.8.brd]] |